You enjoy the ease of wireless connections if you have a Bluetooth-enabled device, but sometimes, you may select to disconnect and find out how to unforget Bluetooth device iPhone if you do not wish to maintain a connection. When Bluetooth connections break down, it’s easy to forget to reconnect the two devices.
You may mistakenly click “Forget” and now wish to re-establish the connection so you may continue to use the wireless connection. Let’s take a closer look at this, as well as how to unforget Bluetooth device iPhone, and lead you through it step-by-step.
How to unforget Bluetooth device iPhone
Most phones have improved their Bluetooth capabilities to make it easier to connect to your gadgets. Once you’ve paired and connected to a device, your phone will remember the details so it can automatically connect to it when it’s in range, making it as simple as possible for you.
Resetting your network settings and then reconnecting the Bluetooth device is the simplest approach to unforget a Bluetooth device. Let’s have a look at the iOS steps about how to unforget Bluetooth device iphone.
Simply resetting network settings is the quickest approach to unforgetting a Bluetooth device. This should compel your phone to “unforget” your device, giving you the option to reconnect.
On your iPhone, go to Settings >> General to unforget a device. There is a list of alternatives here, including “Reset.” Reset all settings, reset contact settings, and reset network settings are among the choices available from the reset tab.
Choose Reset network settings from the list of alternatives. You’ll see a message asking you to confirm that you want to reset all of your network settings. After you confirm it, the reset procedure will begin.
The reset process may take a few seconds, but it will restore your Bluetooth and WiFi settings to their factory defaults. You can reconnect your Bluetooth device this way.
Following the reset, you will see an Apple logo on your screen before the screen goes blank. After a few seconds, the Apple logo will emerge again, followed by your normal screen. You know the reset procedure is complete when the phone displays your home menu.
As the system reboots, it will restore all of the lost data, including the device you left behind. You may now see if the device you forgot about has returned.
Open Settings >> Bluetooth by pressing the Home button on your iPhone. You can see a list of devices that have connected to your device in the past, including the one you should enquire about how to unforget Bluetooth device iPhone.
You can check for available devices and reconnect the device if it doesn’t appear in the list of previously connected devices. Because your phone does not have the memory of forgetting the device, it will easily locate it after scanning.
Switch Your Devices and Your Bluetooth On and Off
If your device still won’t connect after resetting the network settings, try turning it off and on again. This is a simple troubleshooting procedure that you may use on any device to resolve minor software issues.
Depending on the gadget you use, the process is simple. To turn off your iPhone, press and hold the power button while sliding the button that appears on the screen. After the iPhone has turned off for roughly 30 seconds, press and hold the power button to turn it back on.
You can try to connect to your device once your iPhone has started.
Turn Off The Device Pairing Mode and On Again
A minor software issue may be the cause of your device’s failure to connect. You can avoid this by turning on device pairing, then turning it off and on again. This stage of the troubleshooting process should get your device connected without any serious complications.
A switch or a button on most Bluetooth devices allows you to connect it to another device. Locate the switch or button on your Bluetooth speaker, headphone, or earphones and turn to pair off and on.
Wait around 30 seconds after turning off the pairing before turning it back on.
Can a DFU Restore Solve the Problem in iPhones?
If you still can’t connect to your Bluetooth after doing all of the above, you should try a more thorough repair procedure. If you have an iPhone, you can do a DFU (Device Firmware Update) restoration. This is a more intensive restoration that necessitates the creation of a backup of your data before you begin.
You’ll be able to restore your factory settings and rejoin all of your forgotten Bluetooth devices after putting your iPhone in DFU mode. To begin with, back up all of your data to iTunes, iCloud, or another platform of your choice.
Connect your phone to your computer to get started on how to unforget Bluetooth device iPhone. If you have a PC or MacOS Mojave 10.14, open iTunes. You’ll need to launch Finder if you’re on MacOS Catalina 10.15 or later. You can turn your phone on or off.
If you have an iPhone 6s or older, press the Sleep/Wake button and then the home button at the same time. If you have an iPhone 7, simultaneously tap the Sleep/Wake button and the volume down button. On your computer, your phone should appear in the Finder or iTunes.
You must remove the buttons once the phone appears, and the display will become black. You’ll have to repeat the process if the screen doesn’t become black. Then, using either Finder or iTunes, restore your phone.
You can still put your iPhone in DFU mode if it’s an iPhone 8 or higher. To do so, quickly push and release the volume up and down buttons on your phone. Press and hold the side button on your phone until the screen goes dark.
Your phone can be turned on or off while you’re doing this. When the screen goes black, press and hold the volume down button while continuing to press and hold the side button. Release the side button after five seconds, but keep holding the volume down button until your phone appears in Finder or iTunes.
Your phone is already in DFU mode if you see it on iTunes or Finder. If you press and hold the volume down button for too long, the Apple logo will display on the screen, and you’ll have to start over.
Note that entering DFU mode will wipe all of the code from your phone’s hardware and software, allowing it to start over. However, if your phone is already broken, DFU mode may exacerbate the problem.
In conclusion, to discover how to unforget Bluetooth device iPhone by mistake or on purpose. Whatever happens, remember should be a simple process. If all other options have failed, you should consider restoring factory settings.
A simple network reset will not erase your data or information, but it will restore regular operation to your machine.
You are interested: